I’m curious, you got anything light reading you can recommend to ease into the topic, please pm me. I’d appreciate, if it wasn’t another post which basically recites the content of another post, and so on - far too much out there these days)

Don’t get me wrong, just needed to verify that it might be a tool to evaluate.

I had a first try yesterday, but something with my existing SSH .config didn’t work, when I tried to add some “connections”. Is there a logical reason, why Xpipe forces a connection to be established, before adding it in the “search connections” - for me they fail, because I exclusively use key-based SSH auth, but I load my keys on the fly from KeePassXC when I need them, not before.

Nice to see a modern and snappy Java application for a change.

@crschnick@sh.itjust.works First of all - thanks for sharing it! 😍 Just a quick question, after I took a first glance - it is just a management tool application which abstracts the use of CLI management tools like ssh, ssh-keygen, podman, etc… and consolidates it into a single UI, right? - So it is not just “another” service to host, correct?

I cannot recommend any consumer router brand, at least not with stock firmware, because any of them don’t have guaranteed update policy. Further, some of the stock firmware contains insecure protocols, like telnet (yes, still), outdated ciphers (SSL, TLS 1.0), and some feature you want is always missing. Further they often lack innovative features like WireGuard in updates, mostly bug fixes and security patches.

That’s why I would urge you to consider using one of the router/ gateway distributions listed below.

Depending on your requirements, I can recommend the following router OS:

• OpenSense (router without WiFi)
• OpenWRT (router with WiFi)

If you have an old laptop or pc to spare, you could at least give those two a try.

Someone already mentioned it, OpenSense runs only on x86 / PC Hardware (and MiPS). OpenWRT can be flashed onto a lot of consumer routers as well as be installed on traditional x86 / PC hardware.

OpenWRT has a hardware table on their website for supported models. Some of them come cheap if you buy them used and are pretty decent.

If you like more flexibility, I can recommend building your own router. Used thin clients, Iike for example Fujitsu Futro S920. Thin clients are basically low-powered PCs, which are often cheap on the used market and provide a variety of hardware interfaces. Most use Intel NICs, some have secondary NIC, can hold SATA disks, provide interfaces for WiFi (pice, miniPCIe, m.2) or extension cards, have high efficient power supplies and are in majority are passive cooled. Or get some SBC/ Low-Powered board with the interfaces you need. It doesn’t need to be new hardware.

Please don’t host a router on a Hypervisor VM. That does not benefit security. First of all a router is an integral part of the (home) network, therefore it should not be dependent on anything, like a hypervisor. You want to be able to replace or update your server/ hypervisor independently from each other, for example in 5 hrs your router might be still rocking all data, but you would want to upgrade your home server / hypervisor. Furthermore all those OpenWRT, PFsense, OpenSense kernel/ OS hardening is more effective on the hardware itself, especially all RAM/ Memory based security measures. Also if you truly want to be more secure, you use dedicated hardware for multiple reasons, performance is dedicated to only routing/ firewall processing (no other service/ VM can block or slow down packet processing), reducing the attack surface (less software, less attack surface), easier to update.

Many given good advice on hardware, and there are plenty other threads with a lot of good recommendations.

Regarding OS, I would recommend to ease into it, and try some before committing. Just try a few services, how stable it is and if the configuration complexity meets your personal learning expectations. (Self hosting is only fun, as long as you can get everything up and running. If you need 36hrs of troubleshooting for every 2nd problem, that awe for elf hosting melts pretty fast.)

• OpenMediaVault
• Unraid
• TrueNAS
• CasaOS.io

I started myself with OMV 0.x, and since then it’s gotten pretty decent. But I switched to plain Debian and CLI tool. After learning enough using OMV as my starting point. I also tried FreeNAS in the beginning, but that wasn’t for me.

And I recently discovered CasaOS, wich is pretty neat and has a lot of benefits, but I haven’t tested it yet.

Very interesting, do you have any source or references that springs to your mind? I have emergency SOS enabled, but it never happened to me that it has been falsely triggered. And I can’t imagine many scenarios were it would be.

Was signed up there as well, when they started like years ago. But I couldn’t get back into their free tier.

My bad, I meant SPF record.

I have some issue with just that, all emails will end up in a spam filter (if your mail provider is thorough). Also your IP might end up on a public spam/ block list. To much to go wrong, in case some alerts need to reach me.

Plus I use a strict DMARC, so at least a correct SPF is needed.

I’m using postfix on my machines, all services send to it and it just to relays via a SMTP service. So only one point to configure.

I was specifically looking for the last part, a SMTP relay service.

It sounds very promising.

Thanks. I really appreciate all those “niche” products. With just web research I wouldn’t have found it.

I thought about self-hosting, but first of all I got a dynamic IP. Further I want a solution which has roughly 98% availability and 99,99% reliability, because this service tells me if everything burns/ goes awry. That’s not the service I’d like to “toy” with. And hosting any kind of mail service with 98% availability and 99,99% reliability, automatic DKIM roll-over etc. is a tough nut. Even VPS cost’s seem higher than just Amazon SES.

Good to know, thank you. I looked into proton for my primary mail account, but I didn’t think of it for that purpose.

Even if it’s a bit different. It’s always nice to see what’s out there. I will definitively look into it.

Sure - but that would be another thing to self-host - because I have at least 5 machines which need to send, and I have a dynamic IP address - so it would involve updating the MX records via DNS API for at least 5 sub domains.

To be honest, I’m a KISS kind of guy - not everything technical possible or imaginable is worthwhile. Especially if it’s such a crucial part like alert monitoring. I want it done simple, secure, without caveats and keeping the complexity on the lowest level possible.

Many people underestimate it, my goto for a fast an reliable file share service, which does just that, is production ready, has great client software and uses just few resources.

Seafile

Totally agree! I just have been a registered reader on Reddit. Now, it’s the first time I’m participating - might be considerably because lemmy is trending. Nevertheless, I found communities and post I’m interested in within minutes - 👌🏼 whereas Reddit was mostly clutter.

I had only logitech for years, using Windows, Linux, BSD, Dos… without any issues. The older model (probably 15years+) is still working perfectly, mechanical & PS/2. And that has been drowned in Coffee, water, whiskey and what else. Put it in the washing machine (with some clothes to bolster), let it dry and use it like the first day! 👌🏼 Even my current one, for about 10 years in service works like a charm. I admit both are #lowtech devices