My cable management is so bad I can’t close my case but I don’t care

  • hperrin@lemmy.world
    link
    fedilink
    English
    arrow-up
    10
    arrow-down
    1
    ·
    edit-2
    9 days ago

    Why did you put an 850W power supply in that? You could probably put a 650W that’s much nicer for the same price.

      • bizarroland@fedia.io
        link
        fedilink
        arrow-up
        11
        ·
        9 days ago

        Yeah, as long as you’re pulling more than like 20% of the rated power then having a slightly overspec power supply is only going to bring you good things.

          • qyron@sopuli.xyz
            link
            fedilink
            English
            arrow-up
            5
            ·
            8 days ago

            To my knowledge, PSUs are rated up to a declared power output but unless you have hardware that requires all of its power, the PSU doesn’t put out the full charge.

          • cygnus@lemmy.ca
            link
            fedilink
            English
            arrow-up
            4
            ·
            8 days ago

            The PSU doesn’t use more power just because it has a higher maximum capacity. Plus, a PSU is most efficient at partial loads (usually around 60-70%)

            • hperrin@lemmy.world
              link
              fedilink
              English
              arrow-up
              2
              ·
              edit-2
              8 days ago

              A PSU with an efficiency rating, like 80 Plus, will be more efficient than that PSU, even near 100% load (which it wouldn’t be usually).

              • cygnus@lemmy.ca
                link
                fedilink
                English
                arrow-up
                2
                ·
                8 days ago

                Sure, but that difference is less than the variability based on load. The difference in efficiency between a Gold and Platinum PSU is like 4%, but load can vary that efficiency by 10 or 15%