• Estiar@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    What are the most common ones though? Jammers in UHF are shorter range than the VHF jammers, and so these would help with the network.

    It also doesn’t do you any good if you’re trying to attack the tank and all you have is 1GHz+ drones. Equipment isn’t made to deal with anything and everything, after all the radar isn’t obsolete since it can’t defend against an artillery shell.

    • NeuronautML@lemmy.ml
      link
      fedilink
      English
      arrow-up
      4
      ·
      edit-2
      1 year ago

      433 MHz, 915 MHz and the “wi-fi ones”, 2.4 Ghz and 5.8 GHz are the most frequent in off the shelf components

      433 MHz is banned in Europe but allowed in the US.

      915 MHz is banned in the US, but allowed in Europe.

      The wi-fi bands (they don’t go by that name, it’s just most commonly known for that specific use) are allowed everywhere per international convention.

      I’m just saying, they could have selected the jammers better.

      • skillissuer@discuss.tchncs.deM
        link
        fedilink
        English
        arrow-up
        4
        ·
        edit-2
        1 year ago

        there’s also 3.4GHz band, rarely used, could collide with some radars

        433MHz could interfere with some 70cm band radios, depending on how badly are all these baofengs misused

        Of course, if you make your own drones from scratch, you can make them work on any part of spectrum, including what is normally advised against. There are tradeoffs to be done, but not all rules of electromagnetic compliance will be adhered to in wartime

        • NeuronautML@lemmy.ml
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          I think if their jamming goes up to 3 GHz, the sidebands of the jammer might affect at 3.4 GHz too, but yeah, there is also that one.

          The problem with making your own RF systems is that Ukraine would require a steady supply of RF components, which might be hard to secure in war time over off the shelf, which probably have stocked supply lines in most places, through hobbyists stores.