I locked myself out of my detached garage. The remote to open it no longer works.

It’s a really old garage and the opener is from 1999.

Trying to lift it obviously doesnt work. There’s an emergency release you can activate with a key, but the keyhole is crammed full of old hard metallic paint that I can’t get out.

Anything else I can do? Or do I have do smash the thing down?

  • Thurstylark@lemm.ee
    link
    fedilink
    arrow-up
    25
    arrow-down
    1
    ·
    edit-2
    1 year ago

    Also worth mentioning: if you fuck up the door trying to get into it,

    DO NOT ATTEMPT TO FIX A GARAGE DOOR YOURSELF!

    Light percussive maintenance to bend a panel back into shape is one thing, but never ever try to take one apart if you aren’t qualified. There are dangerous springs under tension that can and will kill you.

    Get a professional

    • dan1101@lemmy.world
      link
      fedilink
      arrow-up
      5
      ·
      1 year ago

      The side springs at least are harmless if the door is up and they are not under any tension. But you just have to be double sure the door is secure in the up position.

    • Hyperreality@kbin.social
      link
      fedilink
      arrow-up
      1
      arrow-down
      7
      ·
      1 year ago

      Depends on the garage door. Plenty of electric garage doors use a motor rather than a spring. Relatively safe to repair yourself if you know what you’re doing. The motor’s usually the first thing that breaks and they’re relatively cheap to replace.

      Manual garage door with a spring? Very dangerous, as you rightly pointed out.

      • deejay4am@lemmy.world
        link
        fedilink
        arrow-up
        9
        ·
        1 year ago

        This isn’t usually true, as a power-outage could trap a vehicle inside without a manual release. This is usually a little rope hanging from the connecting latch on the motor chain or screw-traveler.

        If there wasn’t a spring to help lift the door open then the manual release would at best do very little to help you open the door, or at worst send it crashing down uncontrollably if you released it while the door was open.

        Trust me, it’s got a spring.

        • Buddahriffic@lemmy.world
          link
          fedilink
          arrow-up
          6
          ·
          1 year ago

          Yeah, there’s a spring. Those motors don’t have the power to lift it without the spring, at least the one at my dad’s place didn’t have enough power when that spring went.

          • Hyperreality@kbin.social
            link
            fedilink
            arrow-up
            2
            ·
            edit-2
            1 year ago

            Quick google. Here’s an example of a small and relatively affordable motor you can buy:

            https://hurricaneshutters.com/100nm-roll-shutter-motor

            Max carrying capacity is 400lbs/200kg.

            Some of the more powerful ones, you can basically hang on to the door as it’s opening.

            Heavy duty industrial ones? Metro stations where I live automatically open. On more than one occassion a homeless person makes the mistake of tampering with the metal roll down shutters come opening time. They get caught, motor keeps going, drags them into the mechanism and partially crushes them.

        • Hyperreality@kbin.social
          link
          fedilink
          arrow-up
          1
          arrow-down
          3
          ·
          1 year ago

          I’ve come across plenty without a manual release. No rope.

          And yes, without a manual release you can’t easily open it manually while the power’s off. You need to overcome gravity and the motor. Forklift or a jack is the easiest way.

          Direct drive stops it falling down uncontrollably.

      • DannyMac@lemmy.world
        link
        fedilink
        arrow-up
        8
        ·
        1 year ago

        Hold up, that may not be always the case. My garage door has a spring wound under tension to help the motor lift the door and it is a one-car wide garage door. If that has a catastrophic, uncontrolled release and no one gets hurt, consider yourself lucky.

        • Hyperreality@kbin.social
          link
          fedilink
          arrow-up
          1
          arrow-down
          3
          ·
          1 year ago

          Oh, absolutely. Not saying it’s not possible. So check to be sure.

          Mine doesn’t. Used to work maintenance, plenty of electric doors, rolldown stormshutters and theft prevention shutters I encountered didn’t have a spring.

          On a manual door it’s almost certain to use a spring.

          Electric not always the case. Motors are apparently powerful enough.

      • jiberish@lemmy.world
        link
        fedilink
        arrow-up
        6
        ·
        1 year ago

        They all use springs. Modern garage doors use torsion springs which are safer. They look like a small rod mounted on the wall directly above the garage door.

        • Hyperreality@kbin.social
          link
          fedilink
          arrow-up
          0
          arrow-down
          1
          ·
          1 year ago

          Nope. Did maintenance for a while.

          Some the roll garage door is connected directly to the motor which pulls/pushes it up a rail with teeth. Direct drive. No spring, even above the door.

          Roll down storm shutters and theft prevention shutters often don’t have them either.

          Obviously, this is anecdotal for my area, and it’s best to always check.

          It’s possible that the sealed motor unit has a small spring in it, but I’d often replace the entire thing.

      • Thurstylark@lemm.ee
        link
        fedilink
        arrow-up
        5
        ·
        1 year ago

        As far as I’m concerned, not knowing the difference falls under the “not qualified” part of my earlier statement.

        You happen to know what you’ve got, and what you’re doing? Go for it. More power to you.

        Any shadow of doubt? Put the tools down, get someone who knows what they’re doing.